Crown Macro-Tech 3600vz

Crown Macro-Tech VZ Series

Macro-Tech 3600VZ Specifications

Signal-to-Noise: (A-weighted) Better than 105 dB below full rated power into 8 ohms with 26 dB gain. (Unweighted) Better than 100 dB below full rated power.
Input Impedance: Nominally 20 K ohms balanced and 10 K ohms unbalanced.
Controls: Enable, channel 1 and 2 detented level controls, stereo/mono switch (Stereo, Bridge Mono, Parallel-Mono), ground lift switch, input sensitivity switch (0.775 V or 1.4 V for full output or a 26 dB voltage gain), channel 1 and 2 reset (Macro-Tech 3600VZ only).
Connectors:

Inputs: Balanced 1/4-in. phone jacks on chassis, female XLR connectors on standard P.I.P. module.
Output: Two pairs of color-coded binding posts for each channel.
P.I.P.: Standard back panel P.I.P. connector.
AC Line: Standard three-wire grounded connector.

Dimensions: 19 in. (48.3 cm) standard rack mount width, 3.5 in. (8.9 cm) height, 16 in. (40.6 cm) depth behind mounting surface.

Approximate Weight: 55 lbs., 4 oz. (25.1 kg).
Total Harmonic Distortion (THD): Less than 0.05% from 20 Hz to 1 kHz and increasing linearly to 0.1% at 20 kHz delivering rated power into 8 ohms.
Intermodulation Distortion (IMD): (60 Hz and 7 kHz 4:1) Less than 0.05% from less than 368 milliwatts to full rated power into 8 ohms/channel at 26 dB gain.
Load Impedance: Rated for 2 to 8 ohms in Stereo, 4 to 16 ohms in Bridge-Mono and 1 to 4 ohms in Parallel-Mono mode. Safe with all types of loads.
Maximum Average Power At 1 kHz with No More than 0.1% THD:

Output Power per Channel in Stereo Mode with Both Channels Driven:

1,120 watts into 8 ohms, 1,565 watts into 4 ohms, 1,800 watts into 2 ohms.
Output Power in Bridge-Mono Mode:

3,505 watts into 4 ohms.